This pretty planter isn’t only a pot, it may help you hide some accessories like hose or tools inside. Prepare 4 – 1x4x8 cedar board, 2 – 1x2x8 cedar board, 1 – 1x6x8 cedar board, 1 – 2x2x8 pine board, wood glue, kreg jig, 1 ¼” exterior screws, 1 ¼” pocket hole screws. Make sides. Predrill pocket holes into two slats at edges. Attach slats to cross supports using glue and 1 ¼” countersunk screws from the interior. Make 4 pieces. Legs. Attach short side panels to legs using glue and 1 ¼” pocket hole screws. Make 2. Make box. Attach two remaining short side pieces to legs using glue and 1 ¼” pocket hole screws. Repeat for other side panel to complete the box. Read the whole tutorial and the cut list in the source.