DIY Wooden Hose Holder For The Garden

DIY Wooden Hose Holder For The Garden

I guess everyone has hose in the garden, so this holder will be right on position for you. You will start with a 4x4x8′ pine board, then cut it in half. Glue two pieces of wood to it: a 5.5’ one and a 3.5’one. now just drill a hole for the wood finial and screw it into the top. For the water hose holder fin a wall mount holder that you like and use some exterior wood screws to attach it. Now give the whole piece 2 good coats of Rust-Oleum Painter’s Touch in semi-gloss black. Let it dry and go dig it into the ground. Voila!

2 of 6
DIY Wooden Hose Holder For The Garden
3 of 6
DIY Wooden Hose Holder For The Garden
4 of 6
DIY Wooden Hose Holder For The Garden
5 of 6
DIY Wooden Hose Holder For The Garden
6 of 6
DIY Wooden Hose Holder For The Garden
Source: shanty-2-chic